Visualizations → Map
About a Map visualization
A map visualization allows you to display data as locations on a map for geographical analysis. You can compare values and show categories across geographical regions.
The distinction between a visualization and an insight is that an insight is an instance of the visualization. As an instance, an insight has unique configurations that a dashboard developer determines for displaying a chart on a dashboard tab. Insight configurations affect the available user interactions for a dashboard consumer such as the ability to drill down into a grouping dimension.
With two possible dimensions, a map visualization offers a dashboard developer the ability to create an insight that groups one or more aggregated or calculated values by one or more attributes. The result is a map chart on a dashboard tab that shows:
- a grouping dimension as the map regions
- a measure as the blue shades of the regions; darker shades represent higher values
Configurations for a map insight
A dashboard developer first selects a map visualization for an insight in the Analyzer. Using the Analyzer, a dashboard developer configures pill properties, filter properties, and insight settings. Insight settings and pill properties determine not only how the map chart appears as an insight in a dashboard tab, but also how a dashboard consumer can interact with the map chart.
The visualization selection in the Insight panel of the Analyzer determines the available trays. From the Data panel, a dashboard developer adds a column or a formula to a tray. A column or a formula in a tray is a Pill.
Each pill has configurable properties. The parent tray determines the available properties of a pill.
The available trays for a map insight are:
- Grouping Dimension
- Measure
- Individual Filter
- Aggregate Filter
A map insight requires one measure pill and one grouping dimension pill.
Grouping Dimension
From the Data panel, you can add a column or a formula to the Grouping Dimension tray. The Grouping Dimension pill represents the categories in the map insight, such as Country.
Measure
To create an aggregation or calculation, you can add a column or a formula from the Data panel to the Measure tray.
You can select the measure pill to open the Properties panel. In the Properties panel, you can configure various properties such as the Aggregation and Format properties.
Individual Filter
To filter individual rows for the map insight, define an individual filter for the insight. You can add a column or a formula to the Individual Filter tray from the Data panel.
You can select the individual filter pill to open the Filter panel. Using the Filter panel, you can specify the filter operator, one or more filter values, or the filter expression itself with the Formula Builder. You can also disable the individual filter.
To learn more about filter expressions for an individual filter, review Concepts → Individual Filter.
Aggregate Filter
You can define a filter expression that contains an aggregation or calculation using the Aggregate Filter tray.
To create a filter expression, you can add a column or a formula to the Aggregate Filter tray from the Data panel. You can select the aggregate filter pill to open the Filter panel.
Using the Filter panel, you can specify the aggregation, the filter operator, one or more filter values, or the filter expression itself with the Formula Builder. You can also disable the aggregate filter.
To learn more about filter expressions for an aggregate filter, review Concepts → Aggregate Filter.
Pill properties
The parent tray determines the available properties of a pill. There are various possible configurations for each pill type:
- Grouping dimension pill properties
- Measure pill properties
- Individual filter properties for a filter expression
- Aggregate filter properties for a filter expression
You can edit the properties of a grouping dimension, or a measure pill with the Properties panel for a map insight.
To create a filter expression, you can edit the properties of an individual filter or aggregate filter pill with the Filter panel.
In the case of the Filter property of a measure pill, you can open the Filter panel from the Properties panel to create the filter expression.
To open the Properties panel or Filter panel, select the pill arrow.
Grouping dimension pill properties
Here are the properties of a pill in the grouping dimension tray in a map insight:
| Property | Control | Description |
|---|---|---|
| Column fully qualified name | label | The fully qualified name of the selected column. This property is available only when you edit the properties of a column in the tray. Select the information icon (the letter i in a circle) to preview the column function (dimension, key, or measure) and sample data. You can also use the Copy Column Name option (two paper sheets icon) to copy the column’s fully qualified name. |
| Formula | text box | Select to invoke the Formula Builder to create the formula expression you want. This property is available only when you edit the properties of a formula added to the tray. |
| Data → Column Label | text box | Enter the label for the grouping dimension column or formula pill. |
| Data → Date Part | drop down list | When the selected column is a date or timestamp, select the part of the date used. The options are:
|
| Data → Hierarchy | toggle | This option is available only for columns from objects with data hierarchy (physical schema objects with a self-join relationship). Enable this property to specify the level of data in the hierarchy that you want to include in the insight for the respective column. |
| Hierarchy → Level | text box | Enable Hierarchy to configure this property. Enter a numeric value that represents the level of data you want to include in the insight. Leave blank or enter "-1" to include all levels. |
| Data → Map Type | drop down list | Select the type of map. The options are:
|
| Data → Sort By | drag and drop | Drag a column or formula to sort the columns by |
| Drill Down → Dashboards Drill Down | link | Select + Add Dashboard to select a dashboard tab to drill down to when the user selects a grouping dimension value in the insight |
| Add Dashboard → Include Runtime Filters | toggle | Enable this property to pass the applied filter, if any, from one dashboard to another |
| Add Dashboard → Search Dashboard | text box | Enter a search string to filter the dashboard tree. From the results, select a dashboard tab to drill down to. |
Measure pill properties
The parent tray determines the available properties of a pill. Select the arrow to the right of the pill name to open the Properties panel and configure the related properties.
Here are the properties for a pill in the measure tray in a map insight:
| Property | Control | Description |
|---|---|---|
| Column fully qualified name | label | The fully qualified name of the selected column. This property is available only when you edit the properties of a column in the tray. Select the information icon (the letter i in a circle) to preview the column function (dimension, key, or measure) and sample data. You can also use the Copy Column Name option (two paper sheets icon) to copy the column’s fully qualified name. |
| Formula | text box | Select to invoke the Formula Builder and create the formula expression. This property is available only when you edit the properties of a formula added to the tray. |
| Data → Column Label | text box | Enter the label for the measure pill. |
| Data → Date Part | drop down list | When the selected column is a date or timestamp, select the part of the date used. The options are:
|
| Data → Aggregation | drop down list | Select the aggregation option for the measure values. The available options vary. The options are:
|
| Data → Scale | drop down list | Select the chart scale. The options are:
|
| Data → Filter | drag and drop | Drag a column or formula to filter the measure |
| Format → Number Format | drop down list | Select the format of the measure (e.g. Dollar Rounded) |
| Format → Decimal Places | text box | This property appears when you select Decimal, Dollar, Euro, Yen, or Percent as the Format. Enter the number of decimal places to display for the measure value. |
| Format → Thousands Separator | toggle | This property appears for all Format options, except No Format. Enable this property to include a comma separator for values of 1000 or greater. |
| Format → Percentage | toggle | Enable this property to format the value as a percentage |
| Format → Prefix | text box | Enter value to add a prefix and create a custom format. The value of the prefix field cannot contain single quotes. |
| Format → Suffix | text box | Enter value to add a suffix and create a custom format. The value of the suffix field cannot contain single quotes. |
| Format → Abbreviate on Hover | toggle | Enable this property to abbreviate the measure value upon hover |
| Format → Color | icon | Select to change the color of the measure region in the map insight |
| Drill Down → Dashboards Drill down | link | Select + Add Dashboard to select a dashboard tab to drill down to when the user selects the measure value in the insight |
| Add Dashboard → Search Dashboard | text box | Enter a search string to filter the dashboard tree. From the results, select a dashboard tab to drill down to. |
| Advanced → Base Field | drag and drop | Drag a column to join two physical schema objects that are not directly joined. To learn more, review Concepts → Base Table. |
| Advanced → Query Plan | button | Select to access the Query Plan Viewer to check the Direct Data Map path that Incorta Analytics Service uses to retrieve or calculate the measure |
Individual filter properties for a filter expression
To filter individual rows for the map insight, define an individual filter for the insight. You can add a column or a formula to the Individual Filter tray from the Data panel.
Individual filter properties for a filter expression with a column as a pill
Here are the properties of a filter expression for a column as a pill in the Individual Filter tray for a map insight:
| Property | Control | Description |
|---|---|---|
| Column fully qualified name | label | The fully qualified name of the selected column. This property is available only when you edit the properties of a column in the tray. Select the information icon (the letter i in a circle) to preview the column function (dimension, key, or measure) and sample data. You can also use the Copy Column Name option (two paper sheets icon) to copy the column’s fully qualified name. |
| Data → Column Label | text box | Enter the label for the individual filter pill |
| Date Part | drop down list | When the filter column is a date or timestamp, select the part of the date used. The options are:
|
| Operator | drop down list | Select the operator to use in the filter expression |
| Values | multi-select | Select the value(s) to evaluate the column value against. Some operators do not require a value to evaluate against, such as Null and True, and some require more than one value, such as Between. If applicable, enter a string in the search bar to filter the list of values. To add a value to the list, enter it in the text box below the list and select +. |
| Advanced → Disable Filter | toggle | Enable this property to disable the filter. Disabled filters are deleted when you save the insight. |
Individual filter properties for a filter expression with a formula as a pill
Here are the properties for a filter expression for a formula as a pill in the Individual Filter tray for a map insight:
| Property | Control | Description |
|---|---|---|
| Formula label | label | The formula pill label |
| Data → Column Label | text box | Enter the label for the individual filter formula pill |
| Formula → Dynamic | toggle | Enable this property to select a filter expression session variable as a value |
| Formula | text box | Disable Dynamic to configure this property. Enter the formula in the Formula Builder to create the filter expression. |
| Operator | drop down list | Select the operator to use for the filter expression |
| Values | multi-select | Select the value(s) to evaluate the column value against, if required. Some operators do not require a value to evaluate against, such as Null and True, and some require more than one value, such as Between. In the case that you enable Dynamic, select a filter expression session variable. If applicable, enter a string in the search bar to filter the list of values. To add a value to the list, enter it in the text box below the list and select +. |
| Advanced → Disable Filter | toggle | Enable this property to disable the filter. Disabled filters are deleted when you save the insight. |
Aggregate filter pill properties for a filter expression
You can define a filter expression that contains an aggregation or calculation using the Aggregate Filter tray.
Aggregate filter pill properties for a filter expression with a column as a pill
Here are the properties of a filter expression for a column as a pill in the Aggregate Filter tray for a map insight:
| Property | Control | Description |
|---|---|---|
| Column fully qualified name | label | The fully qualified name of the selected column. This property is available only when you edit the properties of a column in the tray. Select the information icon (the letter i in a circle) to preview the column function (dimension, key, or measure) and sample data. You can also use the Copy Column Name option (two paper sheets icon) to copy the column’s fully qualified name. |
| Column Label | text box | Enter the name of the aggregate filter pill |
| Date Part | drop down list | When the filter column is a date or timestamp, select the part of the date used. The options are:
|
| Aggregation | drop down list | Select the aggregation type to use in the filter. The available aggregation types are:
|
| Operator | drop down list | Select the operator to use for the filter expression |
| Values | text box | Enter one or more values to use for the filter expression |
| Disable Filter | toggle | Enable this property to disable the filter. Disabled filters are deleted when you save the insight. |
Aggregate filter properties for a filter expression with a formula as a pill
Here are the properties of a filter expression for a formula as a pill in the Aggregate Filter tray for a map insight:
| Property | Control | Description |
|---|---|---|
| Column Label | text box | Enter the label of the aggregate filter formula pill |
| Formula | text box | Enter the formula in the Formula Builder to create the filter expression |
| Disable Filter | toggle | Enable this property to disable the filter. Disabled filters are deleted when you save the insight. |
Settings panel
With the Settings panel, you can configure additional properties for the map insight. To open the Setting panel, in the Analyzer, in the Action bar, select Settings (gear icon).
| Property | Control | Description |
|---|---|---|
| General → Max Rows | text box | Enter the maximum number of categories to show on the chart. A value lower than the number of the insight query rows returned will restrict results. A value of 0 will include all rows. |
| General → Logarithmic | toggle | Enable this property to display the map on a logarithmic scale |
| General → Auto Refresh | toggle | Enable this property to automatically refresh the insight preview while editing it in the Analyzer. There is a tenant configuration in the CMC Clusters Manager that can globally enable or disable this feature at the tenant level. |
| General → Data Sampling | toggle | Enable this property to use and analyze a representative subset of data in the insight |
| Layout → Data Labels | toggle | Enable this property to display the data labels on the map |
| Layout → Values | toggle | Enable this property to display the values on the map |
| Advanced → Max Groups | text box | Set the maximum number of groups that cannot be exceeded in the insight |
| Advanced → Join Measures | drop down list | Select Yes to calculate the group-by function across joined tables |
User interactions for a map insight
As a dashboard consumer, you can interact with a map insight on a dashboard tab. Some interactions will affect only the map chart. Other interactions will affect both the map chart and the dashboard. The creation of one or more dashboard runtime filters is an example of a user interaction that affects all applicable insights on all tabs of a dashboard.
Some user interactions require specific configurations by a dashboard developer and therefore may not be available.
Here are the possible types of user interactions for a map insight:
- Select a point on a map border to drill down into a grouping dimension and in doing so, create a dashboard runtime filter
- Select a point on a map border to open the Filter by menu and select an option to drill down into a grouping dimension and in doing so, create a dashboard runtime filter
- Select a point on a map border to open the Go to menu and select a dashboard tab to navigate to (requires a dashboard drill down configuration for a grouping dimension pill)
A dashboard runtime filter affects all applicable insights on all tabs of a dashboard. A dashboard runtime filter appears as a filter bar pill and displays the filter expression.
More Options menu for a map insight
Role-Based Access Control (RBAC) enforces access to certain features and functionality. With Discretionary Access Control (DAC), a user who owns the dashboard can control the access to the dashboard. Access rights include the ability to view, share, and edit the dashboard. Together, RBAC and DAC affect the available selections in both the Action bar and the More Options menu for an insight.
For more information about RBAC and DAC, review Tools → Security Manager.
In addition, certain tenant configurations by a Cluster Management Console (CMC) Administrator affect the available selections in the More Options menu for an insight.
Download
- For the map insight, select Download, or select More Options (⋮ vertical ellipsis icon), and then select Download as....
- Select the download file format:
- PNG
- JPEG
- SVG
Print Chart
You can print the map insight in a portrait or landscape orientation. Select More Options (⋮ vertical ellipsis icon), and then select Print Chart.
View as Table
The View as Table is an Incorta Labs feature and a tenant configuration. A CMC Administrator must enable the feature.
To view a map insight as a Listing Table or Aggregated Table, follow these steps:
- For the map insight, select More Options (⋮ vertical ellipsis icon).
- Select the table type:
- View as Regular Table
- View as Aggregated Table
For a Listing Table or Aggregated Table, you can:
- Download as CSV, xlsx, or PDF
- Send to Data Destination
Set Alert
You can set an alert that identifies specific changes to a map insight by defining a filter expression for a measure filter, individual filter, and/or aggregate filter.
- For the map insight, select More Options (⋮ vertical ellipsis icon).
- Select Set Alert. Refer to the Scheduler document for additional information on Data Alerts.
Open Lineage
Starting with 2023.7.0, you can view the data lineage of each insight on the dashboard. The Data Lineage Viewer v2 displays the entities (tables, views, variables, and columns) that the insight references.
- For the map insight, select More Options (⋮ vertical ellipsis icon).
- Select Open Lineage. The Data Lineage Viewer v2 opens displaying the data lineage diagram of the insight.
Steps to create a map insight
For an existing dashboard, to create a map insight for a given dashboard tab, follow these steps:
- If not already open, open a dashboard.
- To add a new insight to the dashboard, in the Action bar, select +.
- If needed, in the Analyzer, in the Data panel, select Manage Dataset.
- In the Manage Data Sets panel, select one or more business schema views and/or one or more physical schema tables.
- To close the Manage Data Sets panel, select X or any other area of the Analyzer.
- In the Insight panel, select V.
- In Charts, select the Map visualization.
- From the Data panel, drag various columns to various trays in the Insight panel:
- Grouping Dimension
- Measure
- Individual Filter
- Aggregate Filter
- Configure the pill properties using the Property panel or Filter panel.
- Configure various insight properties using the Settings panel.
After introducing the dashboard free-form layout in 2023.4.0:
- The steps to add an insight to a dashboard are as follows:
- In the Action bar, select Edit (pen icon).
- From the Insight panel, drag the visualization that you want to the canvas, and then hover over the new insight and select Edit (pen icon) to launch the Analyzer.
- To open an insight in the Analyzer, hover over the insight, and then select Edit (pen icon).
- The steps to edit the insight in the Analyzer are still the same.
Example of a map insight
In this example, you will create a map insight that shows the revenue and cost per product subcategory. The example uses the SALES schema that comes with the Sample Data.
In the CMC, create a tenant that includes Sample Data. The Sample Data includes the SALES schema.
Add an insight starting 2023.4.0
- In the Action bar, select Edit (pen icon).
- From the Insight panel, from Charts, drag Map to the canvas, and then hover over the new insight and select Edit (pen icon) to launch the Analyzer.
- In the Data panel, select Manage Dataset.
- In the Manage Data Sets panel, in Tables, select the SALES schema.
- Close the Manage Data Sets panel.
- From the Data panel, drag the following columns to the respective tray:
- From the Products table, drag Country to the Grouping Dimension tray.
- From the Sales table, drag Revenue to the Measure tray.
- Name the insight Revenues Per Country
- Select Save.
